Below is a list of public InfraHIP test servers. Crossroads and ashenvale are also running HIP rendezvous service which you can use according to the instructions in Chapter 6, Using HIP Rendezvous and HIP Relay Server/Mechanisms.
Table 3.1. Test Servers
| Server | HIT | HI algo | IPv4 address | IPv6 address |
|---|---|---|---|---|
| crossroads.infrahip.net | 2001:1b:a9be:c6a6:34e5:8361:c07f:a990 | RSA | 193.167.187.134 | 2001:708:140:220::7 |
| felwood.infrahip.net | 2001:1d:392e:a450:2cd3:75e1:6098:8104 | RSA | 193.167.187.130 | 2001:708:140:220::3 |
| ashenvale.infrahip.net | 2001:1c:cbae:47ae:2871:f9c:eb94:c8e3 | RSA | 193.167.187.133 | 2001:708:140:220::6 |
The servers are running public http service and respond to ICMPv4 and ICMPv6.
To use access the servers using HIP behind a NAT box, you have two alternatives. Firstly, you enable the UDP encapsulation using "hipconf nat plain-udp". See Chapter 8, HIP NAT Traversal for more information. Secondly, you can install miredo on your machine and make sure that HIP uses the IPv6 address of the server.
To register to the rendezvous servers behind a NAT box, you need to install "miredo" on your machine. Then you register to one of the test servers using its IPv6 address.